مایع ضد جرقه و پاششهای جوش و برش
The above fluid is a welding and cutting material that is used in different places and parts that are in any way exposed to sparks and sparks from welding and cutting, in order to ensure the health and useful life of more pieces. Its applications include welding torches, fixture parts, and all devices located near the welding site, and even in some welding processes, the workpiece itself was created to prevent the adhesion of these sprays and to prevent the appearance of the metallurgical defects. In the surface and crystal lattice of base metal is used. It should be noted that the anti-sputter produced in this company has high properties and quality in preventing the adhesion of these sprays to the surfaces and preventing their damage to the above mentioned, the material in two types of base water and oil base and direction Types of welding are in manual and robotic modes, as well as in spray-sensitive metals and glass and plastic surfaces, and is an effective and definitive solution to prevent irreparable damage to the sputter.
In many advanced industrial countries, they do not use anti-sputter sprays, but use anti-spatter liquid in hand spray containers or in automatic spray systems at specific locations of the production line, which is antispunter solution daily or weekly in containers It is used for charging and is used for some of the main reasons.
۱٫ In spray containers, which, for example, weigh 400 ml, the maximum liquid used is 150 ml, and 250 ml of canister capacity is gas, which should always contain gas volume greater than the liquid in the can, and the reason This is to remove the last volume of liquid from the can and never left in the container because of the completion of gas in the cans of unpasteurized liquid (so you never buy 400ml of liquid, and the amount you pay for gas is worthless and useless Which does not affect your welding process)
۲٫ The constant price of sprays in the market (whether domestic production or external production) over the past few years, due to the price fluctuations of the raw materials of all industries, the price change of the above sprays is very small and in some cases and brands Also, the price has not changed, which indicates that the volume of the internal liquid of the can of the price has remained constant and remains unaffected by the consumer’s eyes.
۳٫ Due to the closure of the can and the lack of visible liquid inside, consumers will never notice the changes in the liquid inside the can in quantitative and qualitative terms. After purchase and use, the quality of the contents of the cans decreases, which is the case of diluted The liquid in the can with cheap solvents or the general change in the liquid inside the can with a lower quality formulation occurs, which is hidden from the buyer’s view because of the inability to see the soluble container inside the can of the buyer’s sight. In the case of transparency of the container or in any other way, if the solution is visible, it can be detected by the physiological parameters As well as the concentration or the color or size of the package was aware when buying.
۴٫ The use of hazardous and dangerous gases to fill spray containers, due to the price of gas and the efficiency of the molecular volume of various gases, many manufacturers use low-quality, cheap and harmful and sometimes hazardous gases for human health that are always smelling Bad and hazardous impurities are associated with their breathing during a shift of work causing serious and irreparable damage to the respiratory system of the welders, and on the other hand causes a feeling of tiredness and burning and headache and cramp in the upper chest and shoulders. And the welders and workers in the workplace have begun to work very shortly since the begging Work, efficiency and energy to deliver quality work for the reasons mentioned above.
It should be noted that for the purpose of testing and correcting the above description, you can fully experience the above with a simple test, for example, compare the weight of a can of full anti-sputter material with a full empty empty can of a precise scale. You will find yourself in an irrational relationship between the weight and volume and the volume specifications inserted on the packaging, or in another way, you can spray some of the liquid contained in the spray cans into a glass or transparent container, and the amount of rinse and Compare the color of the material with other existing or produced samples by the same company on different dates Or ask your welders because they touch the changes in terms of quality during work.
Our solution for the above
The use of Antishopper fluid, which can be provided in transparent containers in different volumes, is sprayed in the spray nozzles at the place of use in the air in the environment, to a high volume in both technical and quality efficiency as well as saving Considering rial value for workshops and factories, you will not pay your money for non-consumable gas with environmental degradation properties and use pure liquid with high volumetric efficiency when spraying.